Araldite SandX (A4 Sheet)
Get a smooth and glossy finish with Araldite® SandX (A4 Sheet), an anti-static paper with anti-clogging properties. Available in 3 different variants – DP, NF & WR
    Multi-Purpose
    Hard Backing
    Double Coverage
Description
Give your creation a smooth and shiny finish with Araldite® SandX (A4 Sheet), a no-fill and dry anti-static paper suitable for sanding plywood, veneer, MDF, hardwood, walls and steel. Its robust anti-clogging and wet resistant properties make it last longer. To meet your key requirements, this product is available in three variants with specialized usage:
  • Araldite® SandX NF No fill-paper with anti-clogging technology. No clogging leads to a longer life
  • Araldite® SandX DP Dry paper with super stock removal technology. Universal product for hand & machine sanding
  • Araldite® SandX WR Water-resistant paper with super waterproof technology. Super flexible latex paper. Ideal for wet or dry application
Where to apply
Directions to use

Araldite SandX( A4 Sheet ) Abrasive Paper

Looking for ways to give your work a great finishing? Check our Araldite’s abrasive paper - Araldite SandX (A4 SHEET). Abrasive papers are one of the most important tools in your working kit. Don’t forget to give your hard work that essential touch of magic with an abrasive paper.

With the Araldite SandX (A4 SHEET) that has anti-static and anti-clogging properties. This abrasive paper is available in three different variants. These include DP, NF and WR. This abrasive paper is multi-purpose, has a hard backing and double coverage.

Araldite® SandX (A4 Sheet) is a no-fill and dry anti-static paper suitable for sanding plywood, veneer, MDF, hardwood, walls and steel. You can give your creation a smooth and shiny finish! What will make it last longer is its robust anti-clogging and wet resistant properties. To meet your key requirements, this product is available in three variants with specialized usage:

Where to Apply Araldite SandX (A4 Sheet)

Araldite SandX is optimized for hardwood & general hardware application also suitable for veneer, plywood, mdf.

When it comes to hardwood, Araldite Sandx can be used for teak, mahogany, rubber, nyatoh, oak, bamboo, maple, cherry, cedar, ash, birch, walnut, rosewood. It is an all-purpose abrasive. Araldite SandX is also a bonding agent for prefabricated concrete elements such that are used to build segmental concrete bridges. Additionally, it is a bonding agent for external reinforcement (steel plate stiffeners to concrete/steel structural members). It also acts as a bonding agent for vertical cladding of marbles, granites, tiles and bricks. It anchors grout for reinforcing steel and prestressed cables in concrete and rock. It can also be used as repairing material for concrete cracks.

Sandpaper in general can be used for metal polishing as well. With the right sandpaper, reviving badly pitted brass can be done easily. The brass might be pitted and tarnished but with a thin protective coating (that is usually a clear lacquer) first must be completely removed before sanding. You can use a paint remover to achieve this. Once you remove the clear coating, the sandpaper can be used to remove the oxidized surface layer of the brass, including any of the pitting that exists.

Sanding is not difficult and as long as you go into it with proper knowledge you will be just fine. Enjoy making your work look even finer with this simple step of sanding using an abrasive paper with Araldite.

Official Website of Araldite